Manual rail drill is suitable for repairing holes in railway, bridge, shipbuilding, tower installation.
Manual rail drill is suitable for repairing holes in railway, bridge, shipbuilding, tower installation. When drilling machine or electric drill cannot be used, hand drill is used to drill holes.It is suitable for repairing drilling hole during tower installation. Hand drill is used for drilling when drilling machine or electric drill cannot be used in various large steel engineering companies (such as railway, bridge, shipbuilding, etc.).Manual drilling.The drill bit is provided separately, and can be equipped with hand board drill frame.
When drilling on the laid track, firstly lay the drill rig between two rails, hold the drill bit against the drilling position, and the feed head of the other end of the drilling rig is on the other end. Rotate the feed handle to make it firmly supported, and then turn the air intake control hand peg anticlockwise to start drilling. When drilling, add cooling water to the drill bit while drilling. When drilling fast, reduce the feed speed to avoid sticking.First, install the drill pants to the end of the manual drill belt, and then install the drill bit to erect the iron frame. The side with hook is pressed by the rail, and the top of the tip of the drill is used to hold the iron screw on the shelf (Note: the large screw on the top can be adjusted). After fixing, the side with the drill bit is aligned with the rail, and the handle of the hand drill can be rotated up and down to drill the hole.
Product | Description |
Model | SZG-32 Manual Rail Driller |
Dimension | 650*75*1000 mm |
Material | Stainless Steel |
Color | Yellow |
Application | For The Rail System Device Application |
Max. Drilling Diameter | φ32 |
Max. Feed Force | 250 N |
Weight | 8kg |
All messages